Concrete Storm Water Sewer Inlet Repair or Replacement
St Louis concrete storm water sewer inlet repair or replacement Call (314) 333-4444 for a Free Estimate or Fill Out Form Below ↓↓↓
Click for Video above
 Leaving parking lot sewer inlets in disrepair, will not only accelerate the deterioration and become more costly to replace, but it will also continue to be a hazardous situation for unsuspecting cars and trucks especially during the night. |
| Hazardous Sewer Inlet |
 Parking lots which may have been repaved in the past, may have caused existing sewer inlets to sit lower in the asphalt, causing cars, trucks and trailers to now scrape and gauge the surface. If this is the case, Topps can installs riser rings under the new inlet to raise it up to avoid gauges while still draining the parking lot. |
| Precast Concrete Sewer Inlet With Risers |
 After removing the old sewer inlet, there is more work that needs to be done before installing the new concrete sewer inlet. This involves repairing the manhole by installing new bricks, adding mortar to old bricks and leveling the area to accept the new inlet. This process takes years of experience to ensure a safe and long lasting installation of your new sewer inlet. |
| Repair Sewer Inlet Manhole for Inlet |
 It is critical before installing the new inlet that all the prep work was done correctly, below. This precast concrete inlet is called a Four Grate Stone. Four 30″ x 15″ metal grates will be set on top of the angle iron, which is anchored into the concrete. Rebar is also installed into the concrete for strength and long lasting durability.
|
| Four Grate Concrete Inlet |
 Final preparation is done around the new concrete sewer inlet, to level and check the drainage into the sewer before final installation. New concrete is installed around the inlet to connect the road or parking lot to the sewer. |
| Check for Drainage Into Sewer Inlet |
 New grates are installed and in this case, we were able to reuse two ductile iron grates while installing two new ductile iron grates. Ductile iron grates are heavy duty grates used in areas for trash trucks and semi traffic. Please watch the above video for more detailed explanation of the different types and uses of sewer inlet grates. |
| Installing 30″ x 15″ Ductile Iron Grates |
 Replacing an old hazardous and deteriorated sewer inlet with a new precast concrete inlet will restore your road or parking lot, often better than the original installation. Fill out the form below for a Free Estimate. |
| New Concrete Inlet Installation |
